HRD-9BK
HRD-9BG
HRD-9GR
HRD-9GRDK
Two Preloaded 8.8" Wide Touch Screen Universal
Replacement Headrest Monitors Package
AV2
USB
SD
OWNER S MANUAL
Specifications
Contents
Power Requirements
Power Consumption
Screen Size
DC 12V
Mute
25
25
25
Caution
4
Play or Pause
Audio
9W
How To Control The Monitor
Remote Control
6
9
8. 8 TFT-LCD
16:9 Wide
1440x234
DVD-AV1-AV2
Stop
26
26
26
Power and Mode Selection
How to Swivel The Monitor
How to Watch The Monitor
11
11
11
Arrows
Setup
Menu
Screen Format
Resolution Pixel
A/V Input
26
Selecting an AV mode
Picture Control
Contrast/Brightness/Color/FM
12
13
13
Display
Number Buttons
Subtitle
Title
27
27
28
28
A/V Output
1 EA
Dimensions(With shroud)
11. 6(L)X8. 7(W)X4. 7(H)inches
Active Matrix TFT
DVD Setup
Setup Menu
14
14
Slow
Fast Reverse Searching
28
29
LCD Panel Type
General Setup
TV Aspect Ratio
Angle Viewing
15
15
15
NTSC/PAL auto select
Compatible video standard
Fast Forward Searching
Previous
29
30
30
OSD Language
15
16
Next
Note : This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
Screen Saver
Audio Setup
Repeat A-B
30
16
Repeat
NTSC/PAL
Angle
31
31
31
Dolby Digital Setup
Equalizer Settings
Video Setup
17
17
19
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
32
PBC
Zoom
Quality
19
22
32
32
Preferences Setup
GO TO
TV Type
PBC
Audio
22
22
22
22
23
23
SD/USB Functions
33
Connection Diagram
Installation
34
35
Subtitle
Disc Menu
Parental
Default
36
23
24
Disc Information
Troubleshooting
Specifications
Password Setup
37
38
Password Mode
Password Change
DVD Functions
24
24
25
Eject
Vol+/Vol-
25
25
3
38
Caution
Troubleshooting
Please read and observe all warnings and instructions in this manual
and those marked on the unit. Retain this booklet for future reference.
There are two kinds of alarm symbols as follows:
Symptom
Items to Check
Actions to be Taken
The lightning bolt with arrowhead inside in an equilateral
triangle is intended to alert the user to the presence of
dangerous voltage within the product s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
people.
Buttons do not work.
No sound
Is the power turned on?
Check the car battery capacity.
,
Is the audio which is connected with
the audio cable set to receive
the DVD signal output?
Select the correct input mode for the audio receiver.
Connect the audio cable into the jacks securely.
Turn on the monitor connected with the audio cable.
WARNING
Is audio cable connected securely?
Set the Audio Output to the correct position,
and then turn on the DVD player again by pressing
the POWER button.
Is the monitor which is connected
with the audio cable turned on?
The exclamation point inside an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
Is the audio output set
in the correct position?
the product.
CAUTION
Remote control does
not work properly.
Is the remote control facing
the remote sensor?
Point the remote control toward the remote sensor of
the product.
Is the distance too far?
Use the remote control within 15 feet.
Remove the obstacle.
Is there any obstacle in the middle?
Is the battery weak?
Replace with new battery.
WARNING
Do not mount the product where
it will obstruct the deployment of
Installation of all TV monitors
the airbag or in an area where it
,
M
E
N
U
must be out of the driver s
field of vision.
would affect the driver s ability
to control the vehicle. Also be
careful to avoid mounting the
product where it can become
hazardous during sudden stops
or in the event of an accident.
Moisture or condensation on lens
When a disc is brought from a cold environment to a warm one, there may be moisture
on the the disc, or condensation on the pickup lens. It will affect disc playback.
Do not try and service these
products yourself, locale a
qualified service center or
factory service center for all
repairs.
1. Remove the disc from the DVD player.
2. Turn on the power and leave it on for an hour to vaporize the condensation.
Use extra caution with any liquids
in your car. If you or your child
spills any liquid on these products,
pull your vehicle to the roadside
and turn the key off to disconnect
or wipe the products with a towel. Do not
operate the equipment until all liquids have
either evaporated or you have had the monitor
inspected at a service center by a qualified
technician. Severe harm or danger can result.
Be careful not to drop or
apply under pressure to the
front panel of your video
monitor. If the screen cracks
due to misuse, your warranty
will be void!
Use only a damp cloth to clean
the screen and use only purified
water on the cloth. wring out all
excess water prior to wiping the
screen. Do not use any cleaners
or chemicals to clean the screen.
In most cases a dry cloth will do!
4
37
Caution
Disc Information
CAUTION
DVD features
DVD discs provide high-resolution images with high-quality sound. This DVD player
can play not only DVD discs of various versions, but also S-VCD, VCD, audio CD and
Mp3 discs.
Watching the monitor for an
extended period of time
without the engine running
may deplete the vehicle s
battery charge.
Quality installations are best
performed by qualified and
certified installers.
Discs that cannot be played
DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. In
addition, a CD or a CD-RW which was recorded on special software cannot be played.
This product is designed for
operation with a 12 Volt DC,
negative ground vehicle. It
is not suitable for operation
under other conditions or
voltages.
Region code
Don t touch the unit if there is
a flash of lightning. You may
receive an electric shock.
Your DVD player is designed and manufactured to region management information
that is recorded on a DVD disc. Please check the region code.
1: North America
4: Australia, Mid & South America
2: Japan
3: Korea and Southeast Asia
5: Russia 6: China
How to handle the disc
Don t touch the shiny side of the disc (the side with the embedded information).
Don t stick a label or a glue-based note on either side of the disc.
Don t use discs that have glue or a damaged label with exposed adhesive residue.
It might result in damage to your DVD player.
Do not cover or stop up heater
ducts or vents. It may cause a
fire or receive an electric shock.
Do not bring magnetic devices
such as credit card or magnetic
card near the magnets.
Don t put discs in the sunshine.
Park your car in the shade.
Operating Notes
1. The operating temperature of this product is limited to 14 ~+140 F.
2. If your vehicle is extremely hot or cold you must allow time for your air
conditioner or heater to cool or heat the vehicle until operating temperatures
have returned to normal operating ranges.
How to handle the discs
Only use round discs. Discs with other shapes like a star, a heart, etc. may cause
damage to the player. If a disc is dirty, wipe softly with a wet cloth and then with a dry
one. Before playback, wipe the disc outward from the center with a clean cloth. Do not
use any type of solvent such as thinner, benzene, commercially available cleaners or
antistatic spray. To avoid damaging your DVD player, don t use a scratched disc.
3. Optimal picture quality is achieved when viewed from directly front of the
monitor (+/-30degrees).
4. Do not open the housing and attempt to make any repairs yourself. Refer
servicing to qualified personnel.
5. DVD Players use an invisible laser beam which can cause hazardous radiation
exposure. Be sure to operate the unit correctly as instructed.
6. Do not cut the car power supply off while a disc is playing. It can cause
damage to the DVD Player.
7. If the buttons get stuck, please try to press the up of buttons, it will get back.
It won't impact using normal.
8. If you cann't find the files name in list when playing, please reset units or
turn off/on over again.
9. If the unit cann't be change mode when playing some special files which the unit
didn't support, please reset units or turn off/on over again.
5
36
Installation
How To Control The Monitor
1. Power On/Off
SD
USB
AV
2
MENU
MODE
MPWR
AV2
AV2
USB
USB
SD
SD
<Unit>
To power on the unit, press POWER button on the monitor;
or press POWER button on the remote control.
Product installed
1. Remove the existing headrest from the seat.
2. Adjust the posts of the new headrest to fit the holes in the seat where the
headrest will be installed. The post can be moved together or apart
grasp one post in each hand, move the posts in opposing directions
(like they were walking) while pushing them toward each other or away
from each other.
MENU
MODE
MPWR
AV2
USB
SD
To power the off unit, press MPWR or PWR on the monitor;
or press POWER button on the remote control.
2. Mode Change
3. Insert the cable in the proper hole. Insert the posts into the holes in the
seat and carefully work the headrest into position. Make sure the cable
is not pinched.
(1) Press any place on the monitor screen with your finger softly ,and you will see the MODE button on the monitor
.
2
4. Run the cable down the seat and out to the location of the video source
unit (such as a DVD player).
+
PLAY
VOL
VOL
1
-
STOP
PREV
MODE
PWR
5. See the picture on the right and you can adjust
the distance between the tubes to required
space(pole width adjustments 4 ~ 8.2 ) .
MENU
NEXT
AV2
AV2
USB
USB
SD
SD
How to use the Adapter tubes
AV2
USB
SD
(2) Press the MODE button to change an Input Mode.(AV1-AV2-DVD)
Since the spacing of the mounting holes
can vary on different veicles we supply
two adapter tubes. Use these tubes when
the headrest mounting holes in your seat
are too large for the posts of the headrest
monitor.
+
PLAY
STOP
PREV
NEXT
VOL
VOL
-
MODE
PWR
MENU
MDE
MPWR
MENU
AV2
AV2
USB
USB
SD
SD
35
6
How To Control The Monitor
Connection Diagram
3. Picture Control Menu
Connect the wires as indicated:
(1) When the MENU button on the monitor screen is
pressed, the picture setting menu will be shown.
a. Red: Connect to a switched(+) 12 volt source (ACC). Use a lead that has(+) 12V
when the ignition on or in the ACC position so the monitors turns off when the key is
in the off position. Wiring the monitors hot could cause your battery to run down
when the engine is not running.
(2) Use to achieve the desired settings for
MENU
CONTRAST
BRIGHTNESS
COLOR
FM
RESET
CONTRAST,BRIGHTNESS, COLOR,
FM and RESET.
CONTRAST : Contrast between light and shade
BRIGHTNESS : Dim
COLOR : Control of color
SHARPNESS : Sharpness of view
Bright
b. Black: Connect to a good chassis ground.
50
c. Reversing the polarity of the red and black leads will damage the monitor.
d. Connect the video input connector to the video output from the source unit
(i.e. DVD player)
FM
: 87.7 89.1MHz
MODE
MENU
RESET
: Brings its factory defaults
(3) Press the MENU button continuously to highlight
the desired picture setting menu to control, and
adjust the values with the left /right arrow buttons
while menu OSD is still displayed on the screen for
changing the values.
AV2
USB
SD
e. Test the syetem.
Note
(4) When using a Remote Controller, press MENU button
on the Remote Controller to bring out the menu, and
adjust the values.
If there is no more touch control for 5 seconds
while any buttons or the Picture Control Menu
are being shown on the monitor, all buttons &
menu will be disappeared automatically.
3. Description of Remoto Control Menu for DVD Player
PLAY
Play DVD
VOL+
Volume Up
+
PLAY
VOL
VOL
STOP
Stop DVD play
VOL-
Volume Down
-
STOP
PREV
NEXT
AV2
USB
SD
PREV
Move to the previous
chapter or track
MODE
AV1 AV2 DVD
MODE
PWR
NEXT
Move to the next
chapter or track
MENU
PWR
DVD Player
Power On/Off
AV2
USB
VIDEO INPUT
AUDIO INPUT
AUDIO INPUT
VIDEO OUTPUT
AUDIO OUTPUT
SD
Use these buttons to select either fast
forward or fast reverse playback.
AUDIO OUTPUT
MENU
Brightness
Contrast
Tint
Color
Sharpnss
Reset
RF Wireless Stereo Headphone
(A CH:914MHz B CH:915MHz)
7
34
SD/USB Functions
How To Control The Monitor
1. When USB or SD is inputed, the monitor will be displayed as shown below. But when
you input USB that the function can not change into SD S state (only the SD is
moving). And you can select the desired menu by pressing the MODE button on the
remote control of monitor.
2. Use the (arrow and ENTER) buttons to select and set desired settings.
00:00 00:00
000/003
kbps
\
11
AV2
USB
SD
..
..
9
10
8
1
2
3
4
5
6 7
8
HEADPHONE JACK
Headphone output
AV2 Inputs
STOP
PIPE
When this button is pressed,
playback is stopped.
Adjustable steel Pipe
9
SD Inputs
10
11
USB Inputs
REMOTE IR SENSOR
8
33
Remote Contro
DVD Functions
PBC
Remote Control
[DVD]/[AUDIO]/[MP3]
This button does not function in PBC mode.
[VCD]
1
POWER
Turns the DVD Player/Monitor on or off.
2
MUTE
Press this button to switch off the
audio during playback. Press again
to restore the audio.
You can turn the PBC (Play Back Control) function on or off by pressing this button.
When PBC is loaded, the PBC function is enabled automatically. This function is
similar to selection of DVD title. Please note that this function does not work with
MP3 dics.
iPOD
Vol+
MONITOR
(IPOD) (not function in this unit)
3
To start playback of iPOD, press
this button. Press again to pause
the playback. If playback is paused,
press this button to resume
playback.
Zoom
Vol-
CONDITION
ZOOM X 2
ZOOM X 3
ZOOM X 4
ZOOM X 1 / 2
ZOOM X 1 / 3
ZOOM X 1 / 4
Off
OSD
2 X
[DVD]
VOL-/VOL+ (not function in this unit)
Some DVDs are programmed to allow you to zoom into
the image, magnifying it. Pressing the ZOOM button
does this in steps, according to the chart to the right.
3 X
Use to incease or decrease
volume level.
4 X
1 / 2
1 / 3
1 / 4
RIGHT( )/LEFT( ) ARROWS
(not function in this unit)
[VCD]/[AUDIO]/[MP3]
This button does not function in this mode.
Use these buttons(press once)
to skip to the next or last track,
chapter or file on the iPOD in
the player. But if you use these
buttons (press continuous) to
select either fast forward or fast
reverse playback.
GO TO
The GO TO function allows you to begin playback at a specific location on the disc. To
do this, press GO TO and navigate the screen which follows to select this playback
location.
AV SELECT
Title
Move to the desired title.
DVD AV1 AV2
MENU (OSD on monitor)
Chapter
Press this button to open the on-
screen menu system to setup and
control various parameters of the
monitor and DVD player.
Move to the desired chapter.
Audio
Selects the desired audio output.
UP/DOWN
Subtitle
Select the desired subtitle.
Menu
Use to move to the desired menu.
TITLE (Title menu)
When a DVD is playing, press this
button to view the Title Menu.
Title
01 / 02
P/N
Chapter
Audio
06 / 61
Angle
5.1CH Chinese
OFF
This button permits you to choose
among Multi, PAL and NTSC.
Subtitle
Watch the different view angle.
DISPLAY
Press to show elapsed or remaining
time of a chapter or a title.
Title Elaapsed 0:20:02
MODE
TT Time
Total time.
Bitrate 31
Use this button to switch between
three modes
DVD SD USB
PBC (Video CD only)
CH Time
Chapter time.
Press this button to access the special
Playback Control functions for VCD
2.0 format Video CD S.
MENU (DVD menu)
Repeat
This button permits you to view the
menu on the DVD.
Sets the repeat play.
Time Display
Watch play time.
NUMERIC button
SUBTITLE
Use this button to select the menu
for choosing a subtitle language.
Use when making a selection on the
menu screen.
9
32
Remote Control
DVD Functions
Repeat
GO TO
RETURN
Use to search for a title or a chapter on
your DVD disc.
Press this button to return to the root menu.
[AUDIO]
[DVD]
SETUP
Pressing REPEAT button changes
the play mode as follows:
Pressing REPEAT button changes
the play mode as follows:
Press this button to display the Setup
menu. The Setup menu enables you
to enter the settings required for the
unit to work properly.
STOP
Press this button to stop the playback
of the current disc.
OSD
Chapter
CONDITION
OSD
CONDITION
Repeat single
SKIP FORWARD/BACK
REPEAT
Repeat chapter
Repeat title
Track
Use these buttons to skip to the next
or last track, chapter or file on the
disc in the player.
Press this button to change the playback
mode to repeat.
All
All
Title
All
A-B (repeat from A to B)
All
Repeat off
FAST FORWARD/REVERSE PLAY
Use this button to select the beginning
and end of a track which you wish to have
repeat in playback.
Repeat off
Use these buttons to select either fast
forward or fast reverse playback.
[VCD]
[MP3]
VOL-/+ button
The REPEAT button does not function
when a VCD disc is being played.
Pressing REPEAT button changes
the play mode as follows:
Use to incease or decrease volume level.
AUDIO
Use this button to select one of the
audio soundtracks programmed on a
DVD disc. It is alse used to select the
audio output mode for the DVD
playback.
OSD
CONDITION
Single
Repeat One
Repeat Folder
Repeat folder
Folder
Repeat folder one time
ENTER
Press this button to confirm the item
you have found and highlighted using
the arrow buttons. Usually this is done
to confirm a selection or item to be
played on the DVD.
Shuffle
Random
Single
All
Random play
Single play
ZOOM
If your DVD disc supports zooming in
to see the program differently, pressing
this button will enable you to change
the amount of zoom.
NTSC/PAL
This button is used to select the video standard for the DVD mode between NTSC
and PAL formats.
UP/DOWN/RIGHT/LEFT ARROWS
Use thes buttons to navigate the
various menus and screens for the
monitor and DVD systems.
PLAY/PAUSE
Angle
To start playback of a disc, press this
button. Press again to pause the
playback. If playback is paused, press
this button to resume playback.
Some DVD s are recorded with additional footage which allows you to view a scene
from a different camera angle. If the ANGLE feature is enabled in the Setup Menu
(see page 14) and the disc has this option,an angle mark will be displayed on
the screen. When that occurs, press the ANGLE button to see these alternate viewing
angles.
10
31
DVD Functions
Power And Mode Selection
How to Swivel The Monitor
Prev(
)
You can adjust the swivel angle as shown below.
[DVD]/[VCD]
Press this button to advance the player from the current chapter to the previous
chapter.
[AUDIO]/[MP3]
Press this button to move to the previous track.
AV2
USB
SD
Make this arrow to swivel the monitor
Next(
)
[DVD]/[VCD]
Press this button to advance the player from the current chapter to the next chapter.
[AUDIO]/[MP3]
Press this button to move from the current track to the next track.
How to Watch The Monitor
1. Connect the monitor to the external devices.
2. Press the POWER button on either the remote control or the unit once to turn
the power on.
Press the same POWER button to turn the power off.
Repeat(A-B)
[DVD]/[VCD]/[AUDIO]
You can set the player to repeat a segment over and over until you cancel it. To do
this, you mark the beginning of the desired segment (A) and the end of segment (B).
The selected segment will be
repeated automatically until canceled.
OSD
A
CONDITION
Start point of repeat
A
B
Ending point repeat function
REMOTE CONTROLLER
UNIT
3. Turn on the external devices and view.
11
30
Power and Mode Selection
DVD Functions
Fast Reverse Searching(
[DVD]
)
Selecting an AV mode
[AUDIO]
1. Turn the power ON on the unit and on the external devices.
Pressing FR button repeatedly changes
the play mode as follow:
Pressing FR button repeatedly
changes the play mode as follow:
OSD
FR 2X
FR 4X
FR 8X
FR 16X
FR 32X
PLAY
CONDITION
2X rewind search
4X rewind search
8X rewind search
16X rewind search
32X rewind search
Play
2. Select the DVD, AV1 or AV2 mode by pressing the AV Select button on
the unit or on the remote control.
OSD
CONDITION
2X rewind search
4X rewind search
8X rewind search
16X rewind search
32X rewind search
Play
FR 2X
FR 4X
3. Play the external device.
FR 8X
FR 16X
[MP3]
Pressing FR button repeatedly
changes the play mode as follows:
FR 32X
PLAY
OSD
FR 2X
FR 4X
FR 8X
FR 16X
FR 32X
PLAY
CONDITION
2X rewind search
4X rewind search
8X rewind search
16X rewind search
32X rewind search
Play
Fast Forward Searching(
[DVD]
Pressing FF button repeatedly changes
)
[AUDIO]/[VCD]
Pressing FF button repeatedly
changes the play mode as follow:
the play mode as follow:
OSD
FF 2X
FF 4X
FF 8X
FF 16X
FF 32X
PLAY
CONDITION
2X forward search
4X forward search
8X forward search
16X forward search
32X forwardsearch
Play
OSD
CONDITION
2X forward search
4X forward search
8X forward search
16X forward search
32X forward search
Play
FF 2X
FF 4X
FF 8X
FF 16X
[MP3]
Pressing FF button repeatedly
changes the play mode as follows:
FF 32X
PLAY
OSD
FF 2X
FF 4X
FF 8X
FF 16X
FF 32X
PLAY
CONDITION
2X forward search
4X forward search
8X forward search
16X forward search
32X forwardsearch
Play
12
29
Picture Control
DVD Functions
Subtitle(SUB-T)
Contrast/Brightness/Color/FM
To adjust CONTRAST, BRIGHTNESS, COLOR or FM press the MENU button until
you arrive at the screen for that item. Use the arrow buttons to adjust the value.
Press the MENU button to make another adjustment or leave the MENU system.
[DVD]
This button is used to select the language for the on-screen display system.
(This title menu may vary, depending on the particular DVD.)
1. Bring up the on-screen function menu by pressing the MENU button on the unit
or the remote control.
2. Press the MENU button on the unit or the remote control of monitor until you see
the item you wish to adjust.
3. Use the arrow buttons to adjust the value.
Title
4. Press the MENU button to make another adjustment or leave the MENU system.
[DVD]
Used to display the title menu of the loaded DVD disc.
This function is only present on discs which support it.
CONTRAST
50
BRIGHTNESS
50
Slow(
)
COLOR
[DVD]/[VCD]
OSD
CONDITION
50
2X slow forward
1 / 2
Use this button to play a disc in slow-forward or
slow-reverse. Slow playback can be done at five
different speeds. Pressing this button repeatedly
decreases the speed in steps. Pressing a sixth
time returns playback to the normal speed.
4X slow forward
8X slow forward
16X slow forward
32X slow forward
2X slow rewind
4X slow rewind
8X slow rewind
16X slow rewind
1 / 4
FM
1 / 8
1 / 16
1 / 32
1 / 2
87.7
(FM function added 87.7 87.9 88.1 88.3 88.5
88.7 88.9 89.1MHz)
1 / 4
1 / 8
1 / 16
32X slow rewind
Play
1 / 32
Play
13
28
DVD Setup
DVD Functions
Display
Setup Menu-Main Page
[DVD]
Pressing the DISPLAY button on the
[AUDIO]
Pressing the display button displays
When the SETUP button is pressed, the setup menu will be displayed as shown
below. Select the menu category and make changes according to your preferences.
remote control changes the play mode as information about the current CD on the
follows:
screen as follows:
1. Press the STOP button if the disc is playing.
OSD
CONDITION
OSD
CONDITION
2. Press the SETUP button to display setup menu.
Single Elapsed
Display the single elapsed
Display the Title Elapsed
Display the Title Remain
Title Elapsed
Title Remain
Single Remain
Total Elapsed
Display the single remain
Display the total elapsed
Display the total remaining
Display the Chapter Elapsed
Display the Chapter Remaining
No sign
Chapter Elapsed
Chapter Remain
Total Remain
General Setup Page
Display Off
TV Display
Angle Mark
OSD Lang
PS
On
ENG
On
[VCD]
[MP3]
Your DVD player will display the counter
automatically when you play the MP3 disc.
Whenever press the button,title chapter
will be displayed as follows:
Screen Saver
OSD
CONDITION
Display time
Single Elapsed
Single Remain
Display Off
Left display time
No sign
Go To General Setup PPaaggee
Number Buttons
[DVD]
3. Use the (arrow and ENTER) buttons to select and set desired settings.
The 0 through 9 number buttons are used to enter the number of the track, the number
of the DVD chapter, the time, the date, etc.
4. Press the SETUP button again to turn off the setup menu.
[AUDIO]
OSD
CONDITION
Select a track by pressing the
corresponding number button.
Select Track:__
Select track no
[DVD]
OSD
CONDITION
You can select a track in the folder by
pressing the corresponding number button.
__:__
Select track no
14
27
DVD Setup
DVD Functions
General Setup
Stop(
)
1. TV Aspect Ratio
[DVD]/[AUDIO]
OSD
CONDITION
Stop
In the Setup function called TV Display, you set the player to output the video signal at the
same aspect ratio as your monitor. If the monitor is widescreen format, select WIDE.
If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B
(Letterbox).
In DVD mode, Press STOP to stop playback.
To resume playback, press PLAY/PAUSE. If
you press STOP and then PLAY/PAUSE twice,
the player will begin playback at the first
scene of the movie.
1 Time Press Play Key To Continue
2 Time
Disc Stop
Normal / PS 4:3 PAN SCAN
Choose this setting if you want the movie to fill the entire screen.
(This might mean that the left and right edges won t be seen)
[MP3]
OSD
CONDITION
In MP3 mode, Pressing STOP will stop the
audio playback. Press PLAY/PAUSE to begin
playback of the first title on the disc.
Normal / LB 4:3
Choose this setting if you want to see the movie in its original aspect ratio.
(The movie might appear with black bars at the top and bottom of the screen.)
1 Time
Stop
Stop
Wide 16:9 WIDE SCREEN
Choose this setting if your DVD Player is connected to a widescreen TV.
(This opition is available only if the disc has a 16:9 display aspect ratio.)
Arrows( / / /
[DVD]
In addition to navigating the various menus, you can use the arrow buttons to define the area
)
of the screen you want to enlarge in ZOOM mode.
General Setup Page
[MP3]
After pressing STOP button, select the desired folder and set the condition by pressing
ENTER button.
TV Display
Angle Mark
OSD Lang
PS
Normal/PS
Normal/LB
Wide
On
ENG
On
Screen Saver
2. Angle Viewing
Set TV Display Mode
Some DVD discs contain programming which allows you
to view a scene from a few different camera angles. You
can tell when a scene is so recorded when an Angle Mark
is displayed on the screen. This mark will only appear if you
have enabled the Angle Mark feature
Setup
Pressing the SETUP button opens the Setup Menu, where you can make and adjust DVD
settings to suit your equipment and preferences.
General Setup Page
TV Display
PS
Angle Mark
OSD Lang
Screen Saver
On
ENG
On
On
Off
in the DVD Setup menu.
On: When selected, the screen will be shown with
angle mark.
Menu
[DVD]
Off: When selected, no angle mark is shown on
the screen.
Set Angle Mark
Pressing the SETUP brings up the DVD disc menu. The content of this menu varies,
depending on the programming of the disc.
3. OSD Language
General Setup Page
English
Korean
French
TV Display
PS
Use this option to set the OSD language.
When selected, change to set the on-screen display
language.
Angle Mark
OSD Lang
Screen Saver
On
ENG
On
German
Italian
Spanish
Portuguese
Dutch
Set OSD Language
26
15
DVD Setup
DVD Functions
Eject
4. Screen Saver
General Setup Page
When this button is pressed, the disc is ejected. When this button is pressed for more
than 3 seconds, the disc is unconditionally ejected. Use this function if you encounter
difficultly ejecting a disc.
The screen saver is useful to prevent your display
from becoming damaged. The screen saver picture
appears when you leave the DVD player in stop mode
for about two minutes.
TV Display
PS
Angle Mark
OSD Lang
Screen Saver
On
ENG
On
On
Off
Vol+/Vol-
Screen Saver
Use these buttons to adjust the audio output level of the speaker from 0 to 20.
Mute
OSD
CONDITION
Mute
Press MUTE to turn off the audio part of the
currently playing program. Press it again to
return the audio volume to the level at which
you were last listening.
Mute
Mute off
Mute off
Play or Pause(
)
Audio Setup
OSD
CONDITION
Play Disc
Whenever this button is pressed, the mode
switches from pause to play or play to pause.
Pause
Audio Setup Page
Audio
[DVD]
Speaker Setup
SPDIF Setup
OSD
CONDITION
2 Channel
Change the audio output format.
(Available only if the disc supports available audio
type.)
1 / 2 : Ac3 2CH English
Dolby Digital Setup
Channel Delay
Equallizer
2 / 2 : Ac3 5.1CH English
5.1 Channel
OSD
Stereo
CONDITION
Stereo
[VCD]/[AUDIO]
3D Processing
Changes the audio output format.
(Available only of the disc supports available audio
type.)
Mono Left
Mono Right
Mix Mono
Mono Left
Mono Right
Mix Mono
[MP3]
An invalid button press.
Go To Speaker Setup PPaaggee
16
25
DVD Setup
DVD Setup
Show below are two examples of Audio Setups.
Password Setup
1. Password Mode
Password Setup, which is required for using the Parental Controls settings,
is divided into two modules: Turning on the Password function, and setting
a Password. The first step is to turn it on in the Password Mode setting.
1. Dolby Digital Setup
Audio Setup Page
Password Setup Page
Dolby Digital Setup
Speaker Setup
SPDIF Setup
Password Mode On
Password
On
Off
Dual Mono
Dynamic
STR
Stereo
L-Mono
R-Mono
Mix-Mono
Dolby Digital Setup
Channel Delay
Equalizer
3D Processing
Go To Dolby Digital Setup
Password Mode
Dual Mono (1 + 1) Setup
Dual Mono
Use this function to set the input audio
signal to match your speaker setup.
Dynamic
Use this function to change the setting
from the factory.
2. Password Change
In the Password setup, you must first enter the current 6-digit passcode, and
then you have the opportunity to change it. The factory default passcode is 136900.
Once you have changed and confirmed the password, press the ENTER button.
Dolby Digital Setup
Dolby Digital Setup
FULL
Dual Mono
Dynamic
STR
Dual Mono
Dynamic
Stereo
STR
L-Mono
R-Mono
Mix-Mono
3 / 4
1 / 2
1 / 4
OFF
Password Setup Page
Password Mode On
Password
On
Change
Old Password
New Password
Confirm PWD
Set DRC Off
Set Stereo Setup
OK
2. Equalizer Settings
Change Password
Please Enter Old Password
Audio Setup Page
Equalizer Page
Speaker Setup
Spdif Setup
EQ Type
None
None
Rock
Pop
Bass Boost
Super Bass
Treble Boost
Off
Off
Off
Dolby Digital Setup
Channel Delay
Equalizer
Live
Dance
Techno
Classic
Soft
3D Processing
Go To Equalizer Page
Select Equalizer Type
24
17
DVD Setup
DVD Setup
5. Disc Menu
Use the Disc Menu option to select the display
language for a DVD s disc menu display language.
(not the same as the players menu)
EQ Equalizer Type
In this menu you can choose the desired preset
equalizer mode.
Preference Page
Equalizer Page
EQ Type None
English
French
Spanish
TV Type
PBC
Audio
Ntsc
On
ENG
None
Rock
Pop
Bass Boost
Super Bass
Treble Boost
Off
Off
Off
1. Press the SETUP button during stop mode.
(Choose from Rock, Pop, Live, Dance, Techno,
Classic or Soft)
Subtitle
Disc Menu
Parental
Default
Chinese
Japanese
Korean
Russian
Thai
Live
2. Press the
3. Press the
/
/
buttons to move to Preference.
buttons to move to Disc Menu.
ENG
Dance
Techno
Classic
Soft
4. Press the ENTER button.
5. Press the
/
buttons to select Disc Menu.
Select Equalizer Type
Preferrred Meenu Lannguage
6. Parental
The Parental Control settings limit the player to only play content at or below a certain
movie rating. The ratings systems in different countries vary. In the USA, the Motion
Picture Association of America(MPAA) rates movies as G, PG, PG-13, etc.
In this menu item, you can set what is the highest level of rating you wish to allow the
unit to play.
Bass Boost
The Bass Boost function increases the volume
level of the bass frequencies.
Equalizer Page
EQ Type
None
Off
Off
Bass Boost
Super Bass
Treble Boost
On
Off
Off
1. Press the SETUP button when stop mode.
Preference Page
2. Press the
3. Press the
/
/
buttons to move to Preference.
buttons to move to Parental.
TV Type
PBC
Audio
Ntsc
On
ENG
1 KID SAF
2 G
3 PG
Boss Boost
4. Press the ENTER button.
5. Press the buttons to select desired
parental level.
Subtitle
Disc Menu
Parental
Default
4 PG 13
5 PGR
6 R
ENG
/
7 NC17
8 ADULT
Super Bass
Super Bass Boost further increases the volume
level of the bass frequencies.
Equalizer Page
EQ Type None
7. Default
Set Parental CControl
If you select RESET when in the DEFAULT settings
mode, all the settings of the Setup Menu will be
returned to the factory defaut settings, except for
Parental Level, Region and Password values.
Bass Boost
Super Bass
Treble Boost
Off
Off
Off
On
Off
Preference Page
TV Type
PBC
Audio
Subtitle
Disc Menu
Parental
Default
Ntsc
On
ENG
Super Bass
1. Press the SETUP button when stop mode.
2. Press the
3. Press the
/
/
buttons to move to Preference.
buttons to move to Default.
ENG
4. Press the ENTER button to select Reset.
Reset
Treble Boost
Treble Boost increases the volume level of the upper
frequencies.
Equalizer Page
EQ Type None
Load Factory Setting
Bass Boost
Super Bass
Treble Boost
Off
Off
Off
On
Off
Treble Boost
23
18
DVD Setup
DVD Setup
Preference
1. TV Type
Choose the proper TV format appropriate to the
monitor you have connected to the player from
the following: NTSC, PAL or Multi type.
Video Setup
Picture Quality
In the Video Setup, you can make adjustments to various elements of the picture quality.
Preference Page
TV Type
PBC
Audio
Ntsc
On
ENG
PAL
Multi
NTSC
1. Press the SETUP button during stop mode.
Subtitle
Disc Menu
Parental
Default
Videoo Setup Page
Video Quality Setup
ENG
2. Press the
3. Press the
/
/
buttons to move to Preference.
buttons to move to TV Type.
Component
Quality
YUV
Color
MID
00
00
None
00
00
High
Medium
Low
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
4. Press the ENTER button.
5. Press the buttons to select TV Type.
Divx VOD
/
Set TV Standard
1 T
2. PBC (Play Back Control)
This feature is only available when a SVCD disc
is loaded. It allows you to disable or enable the
PBC (Play Back Control) menu of VCD discs.
Preference Page
Go TO Video Quality Setup Page
Color
TV Type
PBC
Audio
Ntsc
On
ENG
On
Off
Subtitle
Disc Menu
Parental
Default
ENG
Sharpness can be adjusted by highlighting it in the menu and then using the
UP/DOWN arrow buttons to increase or decrease the sharpness.
1. Press the SETUP button during stop mode.
2. Press the
3. Press the
/
/
buttons to move to Preference.
buttons to move to PBC.
4. Press the ENTER button.
5. Press the
Set PBC State
/
buttons to select TV TypeOn/Off.
Video Quality Setup
Color
MID
00
00
None
00
00
High
Medium
Low
3. Audio
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
Use the audio language menu to select the subtitle
language that you prefer. If the disc you are playing
has that language available, it will display subtitles
in that language.
Preference Page
1 T
English
French
Spanish
TV Type
PBC
Audio
Ntsc
On
ENG
Color
Subtitle
Disc Menu
Parental
Default
Chinese
Japanese
Korean
Russian
Thai
ENG
1. Press the SETUP button during stop mode.
2. Press the
3. Press the
/
/
buttons to move to Preference.
buttons to move to Audio.
Brightness
Use this option to adjust the display brightness. When you reach desired
4. Press the ENTER button.
5. Press the buttons to select desired
audio language.
Preferredd Audio Language
/
brightness level, use the
/
buttons and press the ENTER button.
4. Subtitle
In the Subtitle menu, you can select a subtitle
language. Please note that subtitle will only
appear in this language if the disc programming
has included it.
Video Quality Setup
Preference Page
Color
MID
00
00
None
00
00
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
TV Type
PBC
Audio
French
Spanish
Ntsc
On
ENG
0
Brightness
Chinese
Japanese
Korean
Russian
Thai
Subtitle
Disc Menu
Parental
Default
1. Press the SETUP button during stop mode.
ENG
1 T
2. Press the
3. Press the
4. Press the ENTER button.
/
buttons to move to Preference.
/
buttons to move to Subtitle.
Others
Brightness
Brightness
5. Press the
subtitle.
/
buttons to select desired
Preferredd Subtitle Language
22
19
DVD Setup
DVD Setup
Contrast
Use this option to adjust the contrast level.
Saturation
Select screen saturation level using the direction
ENTER button.
/
buttons and press the
Use the
/
buttons and press the ENTER button, when you reach the
desired contrast level. The contrast control increases or decreases the ratio of
bright and dark screen sections.
Video Quality Setup
Color
MID
00
00
None
00
00
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
Saturation
0
Video Quality Setup
1 T
Color
MID
00
00
None
00
00
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
Saturation
Contrast
0
Saturation
1 T
Luma Delay
Select the Luma Delay menu and select the preferred video image quality.
Contrast
Contrast
Video Quality Setup
Gamma
Color
MID
00
00
None
00
00
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
In some systems, you might experience a loss in the strength of the dark sections of
the displayed picture. This can be helped by changing the Gamma setting, which
boosts the dark level but leaves the other levels unchanged.
1 T
0T
1 T
Luma Delay
Video Quality Setup
Color
MID
00
00
None
00
00
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
High
Medium
Low
None
1 T
Gamma
Hue
Select screen hue level using the direction
/
buttons and press the ENTER button.
Video Quality Setup
Color
MID
00
00
None
00
00
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
Hue
0
1 T
Hue
Hue
20
21
|