Audiovox Xpress XMC 10A User Manual

vehicle guide  
XMC-10A  
Important: This manual contains important safety and operating information. Please read, understand, and  
follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage  
to your Xpress accessories, and/or to your vehicle or property  
3
Congratulations  
Thank you for purchasing the Audiovox Xpress XM® Satellite Radio 2nd Vehicle  
Kit. You are one step closer to experiencing the latest innovation in XM  
Satellite Radio. XM Satellite Radio will revolutionize your vehicle or  
in-home entertainment.  
XM is America’s number one satellite radio service with more than 7 million  
subscribers. Broadcasting live daily from studios in Washington, DC, New York  
City, the Country Music Hall of Fame in Nashville, Toronto and Montreal, XM’s  
2006 lineup includes more than 170 digital channels of choice from coast to  
coast: the most commercial-free music channels, sports, talk, comedy, children’s  
and entertainment programming; and the most advanced traffic and weather  
information.  
XM the leader in satellite-delivered entertainment and data services for the  
automobile market through partnerships with General Motors, Honda, Toyota,  
Hyundai, Nissan, Subaru, Suzuki and Porsche, is available in more than 140  
different vehicle models for 2006. XM’s industry-leading products are available  
at consumer electronics retailers nationwide. For more information about XM  
Required subscription for service sold separately. Premium Channels available at  
additional monthly costs. Installation costs and other fees and taxes may apply,  
including a one-time activation fee. All fees and programming subject to change.  
College sports games subject to availability. Subscriptions subject to Customer  
Agreement included with the XM Welcome Kit and available at  
©2006 XM® Satellite Radio Inc. XM is  
a
trademark of XM Satellite  
Radio. All rights reserved. All other trademarks are the property of their  
respective owners.  
4
FCC Information  
Please note that the power cable that has been supplied with your device is supplied  
with permanently attached ferrite beads at each end. It is the responsibility of the user to  
use the cable with the ferrite beads.  
The user is cautioned that changes or modifications not expressly approved by XM®  
Satellite Radio Inc. can void the user’s authority to operate this device.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) This device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired  
operation.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the installation instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
- Reorient or relocate the antenna of the affected receiver.  
- Increase the separation between the XM equipment and the affected receiver.  
- Connect the XM equipment into an outlet on a circuit different from that to which  
the affected receiver is connected.  
- Consult the dealer or an experienced radio/TV technician for help.  
Warning: The FCC and FAA have not certified XM Satellite Radio Receivers for use in  
any aircraft (neither portable nor permanent installation). Therefore, XM Satellite  
Radio, Inc. cannot support this type of application or installation.  
5
Cautions and Warnings  
1. Do not install the XMC10A vehicle cradle in a position that hinders  
your view through the windshield, or obstructs viewing of the  
dashboard indicators and displays.  
2. Do not install the unit where it may obstruct the operation or  
deployment of safety devices, such as airbags, etc.  
3. Do not allow operation of the unit to detract from safe driving  
practices; remember that you are responsible as the vehicle  
operator to adhere to all safe driving and traffic regulations.  
4. By adhering to these warnings and safety considerations,serious  
accidents and/or personal injury can be avoided.  
6
Contents XMC10A  
Install Manual  
Swivel Bracket 1 pc.  
Antenna 1 pc.  
Cassette Adapter 1pc.  
12 Volt-to-5 Volt DC Power  
Adapter 1 pc.  
See XM SureConnect  
Vehicle installation  
Cradle XMC10A 1 pc.  
XM SureConnect Kit 1 pc.  
7
Contents XMC10A (Cont)  
ACCESSORY KIT  
Alcohol Cleaning Pad,  
Surface Cleaning Pad,  
Instruction Sheet,  
Antenna Cable Exit Plug  
OPTIONAL(sold separately)  
AudioCable  
(P/NSAT-RCA)  
FM Direct Adapter  
(P/N XMFM-1)  
8
Installation/Wiring Precautions  
1. To prevent a short-circuit, be sure to turn off the ignition and remove  
the negative (-) battery cable prior to installation. Connect power  
wires last.  
2. Do not install the unit in locations exposed to direct sunlight or, in  
areas subject to extreme temperatures.  
3. Incorrect installation may cause damage to the system. Mount  
the unit firmly in place, using the supplied hardware.  
4. Be careful not to damage the vehicle wiring.  
5. Be sure to use the supplied screws and washers.  
6. Be careful not to snag any wires when tightening screws.  
7. Use only the 12 Volt-to-5 Volt DC Power Adapter supplied. Use of an  
alternative power adapter may damage the Xpress XM receiver and/  
or the XMC10A cradle.  
CAUTION: You could drain the vehicle battery if the DC power  
adapter remains plugged in after the ignition is turned  
off. Unplug the adapter to prevent this possibility.  
9
Setting Up and Installing Your Kit  
NOTE: The XM signal can be received and processed virtually  
anywhere as long as there are no obvious satellite signal  
obstructions such as nearby buildings, high terrain, parking  
garages ortunnels.  
1. Cabling Interconnections  
You can begin to enjoy XM Satellite Radio as soon as the Xpress  
XM Receiver and Vehicle Kit installation are complete. Set up your  
Audiovox Xpress XM System using the following installation  
instructions, or enlist the help of a professional installer:  
2. Installing the Cradle Mount Base Assembly  
a. Interconnect all of the components as shown on the adjacent  
page to verify that the system operates normally.  
b. Locate a firm, reasonably flat surface within your car to permit  
optimum viewing and line-of-sight access by the supplied remote  
control unit.  
10  
Interconnect Diagram  
NOTE:  
XMC10A CRADLE  
(LEFT SIDE VIEW)  
1. IF THE XMC10A IS INSTALLED  
USING THE OPTIONAL XMFM-1 FM  
DIRECT ADAPTER, DO NOT  
CONNECT AN AUDIO CABLE TO THE  
AUDIO OUT CONNECTOR OF THE  
CRADLE.  
2. THE FM MODULATOR OPTION  
MUST BE SET TO ”FM ON” IN THE  
XPRESS XM USER MENU. (REFER TO  
THE USER GUIDE)  
AUX AUDIO INPUT TO AUDIO OUTPUT  
OF EXTERNAL PLAYBACK DEVICE. THIS  
PERMITS AUDIO FROM AN EXTERNAL  
DEVICE SUCH AS A PORTABLE CD  
PLAYER OR MP3 PLAYER TO BE  
PLAYED THROUGH THE XPRESS XM FM  
MODULATOR .  
+12V to +5V  
DC POWER  
ADAPTER  
TO VEHICLE  
+12 VDC POWER  
RECEPTACLE  
OR  
CLA FEMALE SOCKET WIRES  
TO VEHICLE +12 VDC POWER  
RECEPTACLE (OPTION WITH  
XMFM1 KIT)  
11  
Interconnect Diagram (Cont)  
XMC10A CRADLE  
(REAR VIEW)  
XM ANTENNA  
XMC10A CRADLE  
(RIGHT SIDE VIEW)  
TO VEHICLE RADIO  
ANTENNA JACK  
OPTIONAL SAT-RCA  
AUDIO CABLE  
(SOLD SEPARATELY)  
OPTIONAL FM DIRECT  
ADAPTER XMFM-1 (SOLD  
SEPARATELY)  
(CONNECT TO AUXILIARY  
AUDIO INPUTS ON  
VEHICLE HEAD UNIT.)  
12  
CAUTION: Do not install the swivel bracket on a leather or  
fabric surface, or in a position that could impair your  
vision, block air bag(s) or obstruct vehicle dashboard  
controls and/or radio CD/cassette operational  
displays.  
NOTE: The adhesive backing on the bracket will not permit  
easy repositioning once it has been mated to the  
surface; use extreme care and planning when selecting  
the mounting location. If the bracket is to be screwed  
to the surface, make sure the area in back of the  
mounting surface is clear of wires or other items to  
prevent unintentional damage.  
c. Using the alcohol swab supplied with your kit, clean the  
mounting surface and thoroughly wipe the area dry with a clean  
lint-free cloth.  
d. If the outside air temperature is cold, it may be beneficial to  
warm the adhesive backing on the bracket using a portable hair  
dryer, or by holding the backing surface in front of a vehicle  
heater vent.  
13  
e. Remove the plastic liner from the adhesive backing on the  
bracket, and fix the base in position on the surface; make sure  
the mounting pad is accurately positioned on the first try, since  
repositioning may be difficult, if not impossible.  
f.  
If the bracket is to be screwed in place, do not remove the  
plastic liner from the adhesive backing. Use appropriate sheet  
metal or machine screws for this purpose.  
g. To mount the XMC10A cradle atop the swivel bracket, line up  
the slot at the rear of the cradle with the bracket retainer tab,  
and slide the cradle down so that the slot and tab mesh together  
in a locked position.  
NOTE: Allow a 72-hour period for the adhesive backing to cure  
completely.  
14  
SIDE (HORIZONTAL)  
MOUNTING  
CONFIGURATION  
VERTICAL MOUNTING  
CONFIGURATION  
SWIVEL  
ADJUSTMENT  
SCREW  
XMC10A  
CRADLE  
ASSEMBLY  
PLASTIC LINER AND  
ADHESIVE BACKING  
SWIVEL  
BRACKET  
SCREW HOLES (2)  
FOR DIRECT HARD  
MOUNTING  
15  
3. Using Other Manufacturer’s Mounts  
The XMC10A Cradle can also be installed using other manufacturer’s  
mounts; the mounting plate provisions on the rear and bottom of the  
cradle provide you with two mounting options within the vehicle using  
various vehicle-specific aftermarket brackets.  
4. Installing the Xpress XM Receiver into the Cradle  
Install the Receiver as follows:  
a. After making sure the connectors and guide pin hole are properly  
lined up, gently lower the Xpress XM Receiver into the cradle  
and press down on the Xpress XM Receiver to mate the  
connectors together. The raised detent on the cradle will enter  
the notch on the rear of the Receiver, indicating the Xpress XM  
is properly seated.  
b. The Xpress XM Receiver should now be secured in the  
cradle  
16  
RECEIVER  
NOTCH  
Xpress XM  
RECEIVER  
SYSTEM  
CONNECTOR  
Xpress XM  
RECEIVER  
REAR VIEW  
RAISED  
DETENT  
CRADLE  
FRONT VIEW  
CONNECTOR  
GUIDEPIN  
XMC10A  
SYSTEM  
CONNECTOR  
17  
5. Connection Options  
The Xpress Receiver and Cradle provide an audio output signal  
in three ways:  
a. FM Modulator - When using the XMC10A cradle with the FM  
modulator option, the XM audio signal can be received through  
your vehicle’s radio on selectable FM frequencies using the  
menu option included in your Xpress Receiver. (Refer to the  
User Guide.) The XM audio signal can then be played through  
your vehicle’s radio when that radio is tuned to one of the  
available frequencies.  
NOTE: To minimize radiated interference from the XM  
equipment (antenna and receiver), it will be necessary to  
incorporate the XM SureConnect Vehicle Installation  
instructions provided in the XMC10A.  
b. FM Direct Wiring - If the FM modulator does not provide  
satisfactory performance in your vehicle, use the optional FM  
Direct Adapter, Part # XMFM-1, which provides a hard wired FM  
output.  
c. Low-Level Audio Output - For vehicles equipped with radio head  
units with auxiliary audio inputs, the audio signal can be routed  
through an optional audio cable (Part No. SAT-RCA) and applied  
to the auxiliary inputs of a radio or entertainment system. In this  
case, it is best to turn the Xpress Receiver FM modulator option  
off to avoid interference.  
18  
d. Xpress Cassette Adapter -The XM Xpress Cassette Adapter  
offers an additional audio connection option by utilizing your  
existing vehicle’s in-dash cassette deck.  
XM research and lab test results show that using a vehicle cassette  
adapter can best maximize the relationship between the best sound  
quality and ease of installation (see chart below).  
XMC10A CRADLE  
(RIGHT SIDE VIEW)  
TO VEHICLE  
RADIO ANTENNA  
JACK  
OPTIONAL SAT-RCA  
AUDIO CABLE  
(SOLD SEPARATELY)  
(CONNECT TO  
AUXILIARY AUDIO  
INPUTSON VEHICLE  
HEAD UNIT.)  
OPTIONAL FM DIRECT  
ADAPTER XMFM-1  
(SOLD SEPARATELY)  
19  
Xpress Cassette Adapter Installation.  
Installation is simple.  
1.) Plug the end jack (1) into the XM Xpress Car Cradle’s  
audio output (2).  
2.) Insert the cassette adapter (3) in the vehicle’s in-dash  
cassette slot (4).  
4
3
2
1
20  
6. Installation Guidelines  
Step 1.  
First, determine the proper location for your XM satellite radio  
antenna based on the following criteria for your specific vehicle:  
a.You must locate the satellite radio antenna on the top of the  
roof either in front of the rear window (option 1) or behind the  
windshield (option 2). The satellite radio antenna will perform  
best if magnetically attached to a steel surface with an  
unobstructed view of the open sky and minimum of 3 to 6  
inches of metal surrounding the antenna.  
OPTION  
1
OPTION  
2
KEEP EXCESS CABLE  
UNDER OR BEHIND  
THE DASHBOARD  
b. When routing the antenna cable along the windshield or rear  
window, tuck the antenna cable under the window seal to  
maintain a professional looking installation and to avoid  
loose wires on the exterior of the vehicle which are  
susceptible to damage. Follow the interior cable routing  
diagram depicted by dashed lines in the illustration above  
where possible.  
21  
c. Avoid kinking, crimping, twisting or chafing the cable. Use  
pre-existing wire channels when possible.  
d. For option 1 and rear mounting locations, route the cable into  
the trunk as shown in the previous illustration. Always cross  
the weather seal at the lowest part of the trunk to reduce water  
leaks. From the trunk, route the cable into the passenger  
compartment through available wire channels and then along  
the floor under the door jam trim or under the carpet to the  
front of the passenger compartment. Do not leave the cable  
loose in the passenger compartment where it is likely to be  
damaged.  
e. For option 2 and front mounting locations, route the cable  
along the door jam and into the vehicle as shown. Route the  
cable across the weather seal near the bottom of the door to  
reduce water leaks.  
22  
Step 2.  
Once you have plugged the power  
and antenna jacks into the vehicle  
cradle, secure the cables with tape  
or wire ties to allow for a clean  
appearance.For example, secure  
the excess cable up under your  
dash board, between the seat and  
the console, or on the floor under a  
seat or floor mat. This will help to  
prevent the excess cable from  
interfering with the everyday use of  
your vehicle, improve the  
appearance of the installation, and  
avoid any undesirable accidental  
damage to the cables that might  
result in loss of power or satellite  
signal.  
Be sure to choose a location carefully by taking notice of how  
doors and trunks open and close, as well as how seats move  
when they are adjusted so you can be certain there is ample  
clearance provided for the cables.  
23  
NOTES  
24  
12MONTHLIMITEDWARRANTY  
AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to  
the original retail purchaser of this product that should this product or any  
part thereof, under normal use and conditions, be proven defective in  
material or workmanship within 12 months from the date of original  
purchase, such defect(s) will be repaired or replaced with new or  
reconditioned product (at the Company's option) without charge for parts  
and repair labor.  
To obtain repair or replacement within the terms of this Warranty, the  
product is to be delivered with proof of warranty coverage (e.g. dated bill  
of sale), specification of defect(s), transportation prepaid, to an approved  
warranty station or the Company at the address shown below.  
This Warranty does not extend to the elimination of externally generated  
static or noise, to costs incurred for installation, removal or reinstallation  
of the product, damage to speakers, accessories, or vehicle and home  
electrical systems, malfunction of satellite transmissions, repeater signal  
or receiver unit.  
This Warranty does not apply to any product or part thereof which, in the  
opinion of the Company, has suffered or been damaged through  
alteration, improper installation, mishandling, misuse, neglect, accident,  
or by removal or defacement of the factory serial number/bar code label(s).  
25  
THEEXTENTOFTHECOMPANY'SLIABILITYUNDERTHISWARRANTY  
IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE  
AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE  
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.  
This Warranty is in lieu of all other express warranties or liabilities. ANY  
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF  
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF  
THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY  
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY  
OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD  
OF 48 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO  
CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUEN-  
TIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY  
OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No  
person or representative is authorized to assume for the Company any  
liability other than expressed herein in connection with the sale of this  
product.  
Some states do not allow limitations on how long an implied warranty  
lasts or the exclusion or limitation of incidental or consequential damage  
so the above limitations or exclusions may not apply to you. This  
Warranty gives you specific legal rights and you may also have other  
rights which vary from state to state.  
U.S.A.: AUDIOVOXELECTRONICSCORPORATION,150MARCUSBLVD.,  
HAUPPAUGE, NEW YORK 11788 (1-800-645-4994)  
128-7351  
Audiovox Electronics Corporation  
150 Marcus Blvd.  
Hauppauge, New York 11788  
U.S.A.  
1 800 645 4994  
Printed on Recycled Paper  
©2006 Audiovox Electronics Corporation. All rights reserved.  
XM name and related logos are trademarks of XM Satellite Radio Inc.  
XMC-10A  
128-7472H  

Acnodes APM5064 User Manual
Audiovox Prestige P 950W User Manual
Baxi Potterton Gold FSB 30 HE User Manual
Blaupunkt CD169 User Manual
Bravo View SD 100U User Manual
Bushnell IMAGE VIEW 111024 User Manual
Dual Electronics Corporation Car Stereo System XDM7615 User Manual
GE 681131689441 User Manual
JVC GR SX850 User Manual
JVC GY DV5001 User Manual